Page 10 - CPTE_Lab_Guide_Sample

Official Student Lab Guide

Lab 4 – Detecting Live Systems

b. In the nslookup interactive mode, Type: set type=a and press Enter
c. Now, Type: www.mile2hackworld.com and press Enter (you may replace
mile2hackworld.com with your domain name). The displayed response should be similar
to the one shown in the following figure:

i. You will get an Authoritative or Non-authoritative answer. The answer varies,
but in this lab, it is a Non-authoritative answer
d. In nslookup interactive mode, Type: set type=cname and press Enter
e. Now, Type: mile2hackworld.com and press Enter

NOTE: The DNS server address may be different than the one in the screenshot

f. The displayed response should be similar to the one shown as follows:

Report piracy if the fingerprint in this box is of poor resolution!

g. In nslookup interactive mode, Type: server 192.168.48.1 (or the IP address you
received in the previous step) and press Enter.
h. Now, type set type=a and press Enter.
i. Type www.mile2hackworld.com and press Enter. The displayed response should
be similar to the one shown in the following figure.

P a g e | 58 Certified Penetration Testing Engineer – v06.3.1.4
©Mile2 – All Rights Reserved